Contact us:
(888) 822-2024
(519) 623-2024
[email protected]
100PA: Snap-In Anchor Clamp (Lexan)
100PA: Snap-In Anchor Clamp (Lexan)

The 100PA clamp comes equipped with a fiberglass filler that gives it more strength to effectively perform on the job. The 100PA comes with a Fiber Pin Anchor Device inserted into 1/4" field-drilled hole. All push-on snap hangers will require a firm press to seat the conductor into the hanger. To successfully remove the conductor, it is recommended that it be slid out to avoid any damages to the hanger. The 100PA hanger from Lexan can be only used   on Series C PVC cover rated to 160F, with holding rib. For high temperature applications, use Cross Bolt Hanger Clamps.