Contact us:
(888) 822-2024
(519) 623-2024
[email protected]
100PH: Snap-In Hanger with Rain Cover
100PH: Snap-In Anchor with Rain Cover

The snap-in hangers manufactured by Lexan can only be used on Series C. For applications with high temperatures, use Cross Bolt Hanger Clamps. PVC cover rated to 160F, with holding rib. All push-on snap hangers will be in need of a firm press in order to seat the conductor into the hanger correctly. This model is the same as 100P but this one comes with its own rain hat, so you can use it outside in the rain!  To effectively remove the conductor, it is very highly suggested that the conductor be slid out to avoid any unwanted damages to the hanger.