Contact us:
(888) 822-2024
(519) 623-2024
info@crane-controls.com
TH101: Single Hanger Clamp
TH101: Single Hanger Clamp

The TH101 hanger clamp is stamped cold rolled steel and coated with nylon. This clamp can be mounted using a cross bolt or a back bolt. Bolts are 1/4" and require the mounting hole to be 5/16".

Hangers may be ganged as TH201, TH301, TH402 and are required for every 5' (1.52m) of conductor.

*Note: In order to avoid flexing, the joints should be located no more than 3" (76.2mm) from hangers.

Looking for a replacement part? Navigate here for all Series T products