Contact us:
(888) 822-2024
(519) 623-2024
TH301: Triple Hanger Clamp
TH301: Triple Hanger Clamp

The TH301 hanger clamp is stamped cold rolled steel and coated with nylon. This clamp can be mounted using a cross bolt or a back bolt. Bolts are 1/4" and require the mounting hole to be 5/16". The TH301 is supplied as a triple ganged hanger to save time on installation.

Hangers may be ganged as TH101, TH201, TH402 and are required for every 5' (1.52m) of conductor.

*Note: In order to avoid flexing, the joints should located no more than 3" (76.2mm) from hangers

Looking for a replacement part? Navigate here for all Series T products!