Contact us:
(888) 822-2024
(519) 623-2024
[email protected]
TH402: Quad Hanger Clamp
TH402: Quad Hanger Clamp

The TH402 hanger clamp is stamped cold rolled steel and coatedwith nylon. This clamp can be mounted using a cross bolt or a back bolt. Boltsare 1/4" and require the mounting hole to be 5/16".

The TH402 is supplied as a quad ganged hanger to save timeon installation.

Hangers may be ganged as TH101, TH201, TH301 and arerequired for every 5' (1.52m) of conductor.

*Note: In order to avoid flexing, the joints should belocated no more than 3" (76.2mm) from hangers

Lookingfor a replacement part? Navigate here for all Series T products!
Customer reviews
Shopping Satisfaction
Exact fit and replacement part.
Aaron L.
Shopping Satisfaction
Very helpful and professional.
Cliff G.