Contact us:
(888) 822-2024
(519) 623-2024
info@crane-controls.com
100H: Cross Bolt Hanger Clamp (Indoor Clean Dry)
100H: Cross Bolt Hanger Clamp (Indoor, Clean, Dry)

This steel plated, single hanger cross bolt can be used indoors and in clean/dry environments. The 100H hanger clamp is designed to effectively snap in place, but must be field adjusted in order to achieve the correct sliding tension (unless it is being used as anchor).

Hanger Instruction

Anchor Hangers: Tighten cross-bolts to 6ft lb.

Sliding Hangers: For conductor expansion. Tighten cross bolts, then back off turn.

In need of a component replacement? Navigate here for all Series C products!