TH101: Single Hanger Clamp

The TH101 hanger clamp is stamped cold rolled steel and coatedwith nylon. This clamp can be mounted using a cross bolt or a back bolt. Boltsare 1/4" and require the mounting hole to be 5/16".

Hangers may be ganged as TH201, TH301, TH402 and are required for every 5' (1.52m) of conductor.

*Note: In order to avoid flexing, the joints should belocated no more than 3" (76.2mm) from hangers.

Pricing is quoted ex-works our warehouse. Please include freight instructions with an order (courier / carrier, account and service level you require). Alternatively, we can pre-pay and add freight charges to an order.

DISCLAIMER: Some products featured on this site are made to order and are not always available from stock. If parts are needed urgently please contact us by phone (1-888-822-2024) or email (info@crane-controls.com) before placing your order to confirm lead times.