CA100IS: Isolation Sleeve

CA100IS: Isolation Sleeve

The Isolation sleeve is used to electrically isolate adjacent conductor sections with a 1/2” over surface gap. The sleeve will support adjacent conductor sections but must have hangers within 6” on each side of the isolation sleeve. Collectors bridge the gap electrically. Two sleeves separated by 6” of conductor are required to prevent collectors from bridging the gap as in signal or control functions.
series-c-saf-t-bar-c102x2066935

Pricing is quoted ex-works our warehouse. Please include freight instructions with an order (courier / carrier, account and service level you require). Alternatively, we can pre-pay and add freight charges to an order.

DISCLAIMER: Some products featured on this site are made to order and are not always available from stock. If parts are needed urgently please contact us by phone (1-888-822-2024) or email (info@crane-controls.com) before placing your order to confirm lead times.